background image

6x6 Little Cedar Playhouse 

Outdoor Living Today 

Assembly Manual

Toll Free 1-888-658-1658             www.outdoorlivingtoday.com          [email protected]

Page 1

In the event of a missing or broken piece, simply call the Outdoor Living Today Customer
Support Line @ 1-888-658-1658 within 30 days of the delivery of your purchase.  It is our 
commitment to you to courier replacement parts, free of charge, within 10 business days of
this notification.  Replacement parts will not be provided free of charge after the 30 day grace
period. 

Safety Points and Other Considerations
Our products are built for use based on
proper installation and normal residential
use, on level ground.  Please follow the 
instruction manual when building your 
Playhouse and retain the manual for future 
maintenance purposes.

Some of the safety and usage measures you may wish 
to consider include:

-snow load ratings vary by geographical location.  If heavy or wet snowfall occurs, it is advisable to sweep the
snow off the roof(s) 
-if the product is elevated, any structural and building code requirements are solely the customer's 
responsibility, and should be abided by 
-in high or gusty wind conditions it is advisable to keep the structure securely grounded
-have a regular maintenance plan to ensure screws, doors, windows and parts are tight

Customers agree to hold Outdoor Living Today and any Authorized Dealers free of any 
liability for improper installation, maintenance and repair of any products sold by 
Outdoor Living Today.

Revision #11

December 14, 2018

Thank you for purchasing
a 6x6 Little Cedar Playhouse. 
Please take the time to 
identify all the parts prior 
to assembly. 

Summary of Contents for 6x6 Little Cedar Playhouse


























Reviews: