![background image](http://html.mh-extra.com/html/olt/24/24_assembly-manual_732301007.webp)
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 7
8.
Flip Cleat / Angle Bracket Assembly over
and center on Table Top Boards. The ends of
Angle Brackets will sit flush against Bench
Supports (F). Secure Cleat to Table Top
Boards with 2 - 2 1/2’ screws per Board.
(12 in total)
33”
2 1/2” screws
2 1/2” screws
9.
Lift and position pre-built Benches from
Step 3
onto Bench Supports as shown above. Screw End
Bench Cleats into Bench Supports with 3 - 2 1/2” screws per side. Drill 1/8” pilot holes first to prevent
wood from splitting.
Hint
: have a helper assist you to support the Bench while screwing Bench End Cleat into Bench Support.
Do not attach Angle
Brackets until
Step 10.