![background image](http://html.mh-extra.com/html/olt/24/24_assembly-manual_732301005.webp)
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 5
AA
AA
D
D
D
D
4”
34
1/4”
to
34
1/2”
4.
Lay out 2 Outside Table Top
Boards (AA) and 7 Table Top
Boards (D) as illustrated to the
left. Use 3/8” thick Spacer Blocks
to evenly space boards so the
total
Table Top Width is between
34 1/4” and 34 1/2”.
Position 2 Table Top Cleats (E) 4”
from the ends and secure to Table
Top with 2 - 2 1/2” per board.
(12 screws per cleat).
Spacer
Blocks
2 - 2 1/2” screws
per Board
Bench Boards
with angled
corners to the
outside.
E
E
Table Top Cleat
14
1/2”
15
1/4”
Carriage Bolts
Washer and Nut
5.
Locate Bench Support (F) and 2 Legs (G).
Slide Carriage Bolts through Pre-drilled holes in
each piece. Be sure to align Legs correctly with
holes situated on the lower end of the Leg. Slip
Washer on and tighten Nut with 1/2” Wrench to
complete. Complete 2 sets of Bench Support /
Leg Assembly’s.
F
G
D
D
D
Important
If pre-drilled
holes in legs do not
line up with bench
support holes, flip
leg over.