3.
Carefully lift up 91 1/2” long Track and place underneath lowering cleats and against posts. Slide
track end against existing track end together using the black connector as a guide. Screw end of
track to mid post with 1- 1 1/4” brown screw in tracks counter sunk hole. Secure opposite end of track
to the underside of the lowering cleat with 2 - 1 1/4” Silver Self Tapping Screws. Screw on a slight
angle. Try pre-drilling track first with 1/8” drill bit to make it easier. Secure both tracks further by
screwing 2 more 1 1/4” Self Tapping Silver Screws into track and cleat.
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 6
91 1/2” Track
Gap
2- 1 1/4” Silver Self
Tapping Screws.
1 1/4” Silver Self Tapping Screws
can be hard to start in the
aluminum track. Try pre-drilling
track first with 1/8” drill bit.
Overlap and flush
against Post.