Olsen OLSSC-075, Installation, Operation & Maintenance Manual

Page: 12 / 72

12
Install discharge piping from safety relief valve. See •
fi gure 5-2.
Use ¾" or larger pipe. •
Use pipe suitable for temperatures of 375°F (191°C) •
or greater.
Individual boiler discharge piping shall be independent
•
of other discharge piping.
Size and arrange discharge piping to avoid reducing
•
safety relief valve relieving capacity below minimum
relief valve capacity stated on rating plate.
Run pipe as short and straight as possible to location
•
protecting user from scalding and properly drain
piping.
Install union, if used, close to safety relief valve outlet.
•
Install elbow(s), if used, close to safety relief valve •
outlet and downstream of union (if used).
Terminate pipe with plain end (not threaded). •
5.4 Trim Piping
Temperature - Pressure Gauge. Install temperature •
pressure gauge using nipple, tee and bushing provided
with boiler. See fi gure 5-3.
Drain Valve. Install drain valve using nipple, tee and •
bushing provided with boiler. See fi gure 5-3.
5.5 System Piping
Systems with automatic fi ll valves require back fl ow •
prevention device.
Single boiler system. See fi gures 5-4, 5-5, 5-6, 5-7 for
•
general guidance. Additional considerations:
Control system designed for single central heating •
pump. Installer responsible for integration of
multiple central heating pumps.
Control system allows domestic hot water
•
prioritization. Function could be lost if central
heating pump not directly connected to control
system.
Multiple boiler system. See fi gure 5-8 for general •
guidance. Additional considerations:
Control system requires equivalent water •
temperatures entering each boiler to properly
sequence and adjust system supply temperature.
Install multi boiler sensor kit. See "Parts, Kits &
•
Optional Accessories" manual for part number.
5 - HYDRONIC PIPING
FIGURE 5-3 Temperature Pressure Gauge and
Drain Valve Installations
Temperature Pressure
Gauge shown at
System Supply
Connection
Check Local Codes
For Maximum
Distance To Floor
WARNING
Burn and scald hazard. Safety relief valve could
discharge steam or hot water during operation.
Install discharge piping per these instructions.
!
FIGURE 5-2 Safety Relief Valve Discharge Piping
Drain Valve shown
at System Return
Connection to Boiler
Safety Relief Valve
Gas Supply