background image

14

Changing day time reduction (duration and 

temperature) permanently

While pressing [F], press twice on [5].
“h” (hours) will flash. The set reduction period will flash

afterwards (e. g. 06 = 6 hours).
Press the [+] / [–] buttons to change the reduction pe-

riod.
Confirm by pressing [F]
“d”  lights  up  briefl . The  set  weekday  will  flash after-

wards.
Use the [+] / [–] buttons to change the day of the week 

(Monday = 1, Tuesday = 2, etc.).
Confirm by pressing [F]
The set reduction temperature will flash
Press the [+] / [–] buttons to change the reduction tem-

perature.
Confirm by pressing [F]
The  set  reduction  temperature  lights  up,  while  the 

green LED (1) flashes to indicate that the day time re-

duction has been activated.

Deleting the reduction permanently

Keep pressing [5] (day time reduction) or [7] (night time 

reduction) until the green LED goes out. The comfort 

temperature lights up.

OFfice mod

Beginning of the reduction

Three hours prior to the desired start of the reduction 

period, press the [7] button until “h” (hours) starts flas -

ing. “12” (12 = 12 hours) will flash afterwards
Use the [+] / [–] buttons to set the duration for the re-

duction in hours.
Confirm by pressing [F]
“d” lights up briefl . “1” will flash afterwards
Use the [+] / [–] buttons to set the correct day of the 

week (Monday = 1, Tuesday = 2, etc.).
Confirm by pressing [F]
“17” (°C) will flash
Press the [+] / [–] buttons to set the reduction tempera-

ture.
Confirm by pressing [F]
The comfort temperature will be lit for the next 3 hours 

until the reduction sets in, while the green LED (4) indi-

cates that the reduction has been activated. 
This process is repeated on all weekdays. The reduc-

tion will last for 24 hours on Saturdays and Sundays.

Changing the current temperature once

Press the [+] / [–] buttons to set the desired tempera-

ture.
The temperature change will only apply until the next 

period begins.

 1....LED day time reduction
 2....Display desired set temperature
 3....LED heating On / Off
 4....LED night time reduction
[F] ..Function button
[+] ..
[–]...Button –
[5]...Button day time reduction
[7]...Button night time reduction

1

2

3

4

Summary of Contents for Noblesse










Reviews: