12
Operating manual for the user
The appliance is not suitable for unsupervised use by
children or by persons with learning disabilities, lim-
ited sensory capacity or physical disabilities. Ensure
that it is not operated by persons who, due to lack of
experience and/or knowledge, might not be aware of
the risks associated with it, unless they are supervised
and instructed by a person who has read the operating
manual. Ensure that the appliance cannot be switched
on by children while unsupervised.
Operating modes of the convector
There are 3 different operating modes available de-
pending on the required application.
HO (HOme mode)
for private rooms. Daily day time and night time reduc-
tion, no day time reduction on the weekend.
OF (OFfice mode
for offices and rooms of similar use. Automatic night
time reduction during the week, constant reduction on
the weekend.
CA (CAbin mode)
for weekend homes. No reduction during the stay.
Constant reduction during absence.
At start-up and after a power failure
lasting more than 24 hours
The start-up/reset procedure has to be performed to
establish the correct modus and function.
The procedure must be completed in one continuous
sequence to be valid.
Should the procedure be performed incorrectly or fail;
switch off the heater and start a new reset procedure.
After the heater is switched on, a sequence like °C / 17
/ rE will flash in the displa .
This tells that the thermostat has been without power
for a long period and need to be restarted.
To set the heater back to factory default, switch off the
heater by using the main switch.
Press [F] and hold while switching on by using the main
switch. Continue to press [F] until rE flash in the dis-
play. Release [F].
* After some seconds HO (Home) will flash in the dis-
play.
You can select between the modus HO (Home), OF
(OFfice) and CA (CAbin = weekend home) by pressing
[+] / [–].
Confirm your choice by pressing [F]. 22 (°C) will flas
Select the comfort temperature you wish by pressing
[+] / [–].The comfort temperature is the room temper-
ature that will be maintained outside of the reduction
times.
Confirm by pressing [F] more than 5 seconds, till the
comfort temperature is flashing. The selected comfort
temperature has been stored.
1....LED day time reduction
2....Display desired set temperature
3....LED heating On / Off
4....LED night time reduction
[F] ..Function button
[+] ..
[–]...Button –
[5]...Button day time reduction
[7]...Button night time reduction
1
2
3
4
