23
Main menu continued
Management
Exit
Return to Main menu
OSD Display
Exit
Return to Management menu
OSD H. pos
Move position of the OSD display horizontally
OSD V. pos
Move position of the OSD display vertically
Language
Select language for OSD. Returns to Main Menu and will from then
on show the OSD in the selected language. You can choose between
English, French, German, Italian, Spanish or Japanese.
Source
Exit
Return to Management menu
VGA
Display signals from VGA connector (15-pin Mini D-sub). In VGA input, it
supports Sync-on green and the interlace timing can be displayed.
DVI-I Digital
Display signals from DVI connector. (29-pin DVI).
DVI-I Analog
Display signals from DVI connector. (29-pin DVI). In VGA input, it supports
Sync-on green and the interlace timing can be displayed.
Recall
If you execute Recall the monitor will be reset to values that are default
values at time of delivery.
Lum stable
Automatic Luminance Stabilization (ALS) has been developed for Barten
and Calibration color modes and will automatically be set to ON for these
modes. The setting cannot be changed by the user. ALS will stabilize
brightness at calibrated luminance value regardless of the temperature
inside the monitor or its surrounding. It will also quickly ramp up to this
luminance setting when the monitor is switched on. If you use Normal
Color Mode, then you can switch it ON or OFF but the recommendation is
to set it to OFF.
Operation hours
Selecting this submenu will show how many hours the monitor has been
used.
*1 These functions are only available when the monitor input Source is analog.
Charts of OSD Adjustment Functions
