Olmo OSH-07FRH2, User Manual

Page: 13 / 44

Operation instructions
TIMER ON mode
It is convenient to set the timer on with TIMER button when you go out in the morning to achieve a
comfortable room temperature at the time you get home.
11
Note: * indicates the set number.
Press the or button.
Once to increase or decrease the time setting by 1 hour.
A "beep" can be heard.
The TIMER indicator on the indoor unit lights up. (invalid
for some models)
“ON *h" stops flashing.
When your desired time displayed on LCD, press the TIMER button and confirm it.
Result :
Result :
Press button.
Press the button again.
A "beep" can be heard and the indicator disappears,
the time on mode has been canceled. Result :
How to cancel TIMER ON?
How to set TIMER ON?
Result : “ON 0h" flashes on the LCD.
1.
2 .
3.
PRESS
PRESS
PRESS
PRESS
PRESS
ON
CLEAN mode
PRESS
PRESS
Press ON/OFF or SMART or MODE button can cancel the Clean mode, then the
indicator “ ” will disappear.
When the air conditioner and remote controller are in standby, and the mode of remote controller is in
Cooling or Dry,
once to start Clean mode
,
then the indicator “ ” will
display on LCD.
press“ ” button for 5 seconds
This remote controller can turn off by pressing ON/OFF button to save electricity. When the remote
controller turns off
, the CLEAN and TIMER ON function can be operated. ( in standby )
After the clean process finish, the air conditioner will return to Cooling or Dry as preset,
while the indicator“ ” on remote controller will display for about 10 mins