EN
Lightning protection
All WZG energisers are protected against over voltage and the warranty covers also
lightning damage. However, it is not possible to build the fence energiser to
withstand all possible situations. Therefore it is wise to use an WZG lighting diverter
whenever the fence is situated in very open ground or if lightning occurs frequently
in the region. It is also advisable to disconnect both the fence and mains power from
the energizer if you leave your electric fence unused for a long period of time.
Warranty
This product carries a three (3) year
manufacturer’s warranty for materials and
workmanship from the date it was retailed, the
warranty includes overloads caused by lightning.
To claim the warranty, the customer should
return the defect product to the Manufacturer,
reseller or the nearest WZG Service Partner at
customer's own expense. The warranty claim
must be accompanied by the description of the fault, copy of the sales receipt and
customer's contact information. The
Manufacturer / WZG Service Partner will repair
or replace the defect product and return it as soon as possible.
The warranty does not cover any damages that are caused by incorrect or careless
use of the product, installation that does not correspond to the provided instructions
and other damages which may arise due to causes beyond the control of the
Manufacturer. WZG does not accept any responsibility for any direct, indirect or
consequential damages that are caused by the use of the product or the fact that the
product could not be used. The liability of WZG is limited to the price of the product
in maximum.
Instructions for installation and connection of electric fences
Electric fences shall be installed, operated and maintained in a manner that
minimizes danger to persons, animals or their surroundings and as far as is
reasonably possible out of the reach of children and not subject to mechanical
damage. Any electric fence installed along a public road or pathway must be
identified with warning signs at regular intervals. The warning sign should have a
yellow background and be at least 100mm x 200mm and 25mm high, and have the
24
