Page | 65
ERGOFLAM AIR
Removing the ‘ash box’ gives access to an opening that makes it possible to clean
the compartment where the ashes and debris generated by normal operation of
the apparatus accumulate. In order to be able to reach the compartment, simply
remove the cover that is just behind the box by releasing the two nuts (wing-nuts).
ERGOFLAM IDRO
In this model the area of the set of pipes can be reached from openings placed at
the rear of the apparatus, and access is gained also by removing the cast iron plate
of the combustion chamber.
The front plate is removed very simply by first of all moving the pan as shown in figure
4.7. Having removed the pan, just unscrew the screws placed behind it to remove
the flame-shaped cast iron panel and gain access to the area of the set of pipes.
Figure 4.7: Cast iron combustion chamber plate
In order to be able to reach the rear slits, it is necessary to remove the rear panel by
releasing some screws.