Olivetti PG 2028 SPECIAL Operation Manual Download Page 93

Page: 93 / 104

Option

6-7

Network Interface Card (IB-23)

The network interface card supports TCP/IP, IPX/SPX, NetBEUI and
AppleTalk protocols, so that the printer can be used on network
environments including Windows, Macintosh, UNIX, NetWare, etc.

The

network interface card

must be installed in the option interface slot

that is located at the back of the printer.

Turn off the printer and disconnect the

power cord

and

printer cable

Open the

rear cover

Remove the

optional interface slot cover

Insert the

Network Interface Card

and secure it with the screws

removed in step 3.

Close the

rear cover

, and connect the

printer cable

Connect the

power cord

, and turn on the printer.

Configure the network address from

Quick Setup

. For more

information, refer to

Operation Guide

of the network card.

Summary of Contents for PG 2028 SPECIAL









































































































Search results

Summary of Contents for PG 2028 SPECIAL

Reviews:

Related manuals for PG 2028 SPECIAL

Brands by name

Popular brands

Olivetti PG 2028 SPECIAL, Operation Manual

Search results

Summary of Contents for PG 2028 SPECIAL

Reviews:

Related manuals for PG 2028 SPECIAL

Brands by name

Popular brands