Olivetti OLIBOARD, User Manual

Page: 34 / 250

OLIBOARD - Interactive Whiteboards 26
2. Clicking with the mouse left button on “ Re-orientation ”, a popup window
appears. With the electronic pen, click at the mid-point of the flashing cross “ + ”
on the whiteboard. Repeat this same operation for all the other orientation points
(there are six in all), being careful to center precisely the mid-point of the flashing
cross with the electronic pen.
INSTRUCTION: Select “ Re-orientation ” the first time the Oliboard Driver is
installed or if the position of the projector or of the Interactive
Whiteboard changes, or if the display mode changes (e.g. image
size or resolution).
To perform a rapid orientation, you can select “
Previous re-
orientation record ” as long as no changes have been made
since it was last used. If an accurate orientation is not required,
select “
Default Orientation ”.