Olivetti OLIBOARD, User Manual

Page: 21 / 250

OLIBOARD - Interactive Whiteboards 13
ENGL
ISH
Installing the Oliboard Software
1. Click .
2. Choose the language you want to install.
3. Select the installation path. The software installation starts.
4. When installation completes a message appears; click on “ Finish ”.
Installing the Software Driver for the USB Cable
Normally it is not necessary to execute this procedure if the “Express installation” has
already been performed.
1. Click “ Install USB Driver ” to install the driver for the USB
cable.
2. Click “ Install FTDI Driver ” to install the driver.
After connecting the cable, click “ OK ”. If the installation completes correctly, a
message to this effect is displayed.
You can check if the USB cable driver has been installed by clicking with the mouse
right button on “
Computer Resources ”, then with the mouse left button on
“ Properties “
→
“ Hardware “
→
“ Device Manager “
→
“ Port “ (COM and LPT) ”.
The device “ USB Serial Port “ is shown. Make sure that the COM port assigned is less
than 10 (e.g. COM 5) and that the transmission speed is 57600.