background image

27

T

ROUBLESHOOTING

 

GUIDE

W

HAT

 

HAPPENS

 

IF

 

THERE

 

IS

 

A

 

POWER

FAILURE

In there is a power failure, the fax machine keeps the follow-
ing data in the memory: the date and time, the numbers set for
one-touch and speed dialing, the reports, the documents
received and the documents to be sent.

W

HAT

 

HAPPENS

 

IF

 

THE

 

PAPER

 

OR

 

INK

 

HAS

RUN

 

OUT

If, during reception

the 

paper runs out 

or 

gets jammed,

the ink runs out, the print head compartment cover is
open, the paper support is closed or the operator
console is raised, 

 the machine stops printing  and the

display shows the relevant message and the document you
are receiving is 

temporarily recorded in the memory

.

Once the problem has been solved, the fax machine resumes
printing.

I

F

 

THE

 

TRANSMISSION

 

IS

 

UNSUCCESSFUL

Sometimes, due to line problems such as excessively heavy
telephone traffic or any other kind of interference, the docu-
ment sent is received badly by the correspondent, who will
ask you to send it to him again.
In these cases, it is advisable to send the document again at

slower speed

. Follow the procedure described in the "

To

reduce the transmission speed

" section of the "

More

sophisticated operations

" chapter.

If 

transmission is not completed

 due to errors on the line

or fax machine, the error LED "

" lights up and a short

beep is emitted; in this case,  the fax machine automatically
prints 

the transmission report

 (see "

To print reports

and lists

", chapter "

Basic transmission and reception

operations

"), on which an 

error code

 indicates the cause

of the error (you will find a list of all the error codes later).

Once the machine has finished printing, press the 

 

 

key,

turn off the ERROR LED  "

" indicator and remove the

document by hand from the ADF.

F

OR

 

MINOR

 

PROBLEMS

The list below may be used as a guide to the solution of minor prob-
lems.

PROBLEM

SOLUTION

The fax machine gives no

sign of life.

Check that it is connected to

the power socket.

The document is not fed in

correctly.

Check that the document
respects the
recommendations listed in
"

What documents may be

used

", chapter "

Basic

transmission and reception

operations

".

The fax machine will not

send a document.

Check that the document is
not jammed.

The line is busy: wait until it

is free and then try sending

the document again.

The fax machine will not

receive a document
automatically.

It is set for manual
reception: set it up for
automatic reception.

The fax machine will not

copy or receive documents.

Check that no documents or
sheets of paper are

jammed.

You are using an unsuitable

kind of paper: check the
characteristics of the paper
listed in the "

Technical

data

".

The fax machine prints blank

sheets.

Place the document in the
correct position with the
side to be copied facing
upwards.

NOTe

Incorrect transmission or reception by the fax machine may
also depend on factors other than those listed above, which
will be signalled in the form of

 error codes 

on the  "

Trans-

mission report

" and "

Activity report

", see "

To print re-

ports and lists

", chapter "

Basic transmission and re-

ception operations

".

Summary of Contents for Jet-Lab 400


















































Reviews: