Olivetti FAX System M-New, Service Manual

Page: 38 / 86

3KH-2
1-3-13
U630
(cont.)
2. Select the item to be set.
The screen changes to the submenu for making settings.
The port that is addressed by U698 is displayed when the optional dual FAX is installed.
The current settings are highlighted. If the optional dual FAX has been installed and if U698 is set to
[ALL] and settings for ports 1 and 2 are not identical, the display is not highlighted.
Setting the communication starting speed
Sets the initial communication speed when starting transmission. When the destination unit has V.34 capabil-
ity, V.34 is selected for transmission, regardless of this setting.
1. Select the setting.
2. Press the start key. The setting is set.
Setting the reception speed
Sets the reception speed that the sender is informed of using the DIS or NSF signal. When the destination
unit has V.34 capability, V.34 is selected, regardless of the setting.
1. Select the setting.
2. Press the start key. The setting is set.
Setting the waiting period to prevent echo problems at the sender
Sets the period before a DCS signal is sent after a DIS signal is received. Used when problems occur due to
echoes at the sender.
1. Select the setting.
2. Press the start key. The setting is set.
Setting the waiting period to prevent echo problems at the receiver
Sets the period before an NSF, CSI or DIS signal is sent after a CED signal is received. Used when problems
occur due to echoes at the receiver.
1. Select the setting.
2. Press the start key. The setting is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Maintenance
item No.
Description
Display Description
TX SPEED Sets the communication starting speed.
RX SPEED Sets the reception speed.
TX ECHO Sets the waiting period to prevent echo problems at the sender.
RX ECHO Sets the waiting period to prevent echo problems at the receiver.
Display Description
14400bps/V17 V.17, 14400 bps
9600bps/V29 V.17, 9600 bps
4800bps/V27ter V.27ter, 4800 bps
2400bps/V27ter V.27ter, 2400 bps
Display Description
14400bps V.17, V.33, V.29, V.27ter
9600bps V.29, V.27ter
4800bps V.27ter
2400bps V.27ter (fallback only)
Display Description
500 Sends a DCS 500 ms after receiving a DIS.
300 Sends a DCS 300 ms after receiving a DIS.
Display Description
500 Sends an NSF, CSI or DIS 500 ms after receiving a CED.
75 Sends an NSF, CSI or DIS 75 ms after receiving a CED.
Y108810-2 Service Manual