3KH-2
1-2-3
Initialization procedure after installing the facsimile system
1. Insert the machine power plug to the wall outlet and turn the main power switch on.
2. Press the status key and enter 10871087 using the numeric keys. The machine enters maintenance mode.
3. Only when the optional dual FAX is installed:
When both the FAX system and the dual FAX are installed: Run maintenance mode U698 using the cursor up
or down key, or numeric keys, press [PORT SELECT], select [ALL] and press the start key.
If the FAX system is already in use and the dual FAX is additionally installed: Run maintenance mode U698,
press [PORT SELECT], select [P2] and press the start key.
4. Run maintenance item U600 using the cursor up/down keys or numeric keys.
5. Press [Execute] and then press the start key.
6. Select [Country Code] and enter a destination code using the numeric keys (refer to the destination code list).
Enter a destination code with three digits.
7. Select [OEM Code], enter the OEM code
(000) and then press the start key.
8. After initialization, the entered destination,
OEM codes and ROM version are dis-
played. A ROM version displays three kinds,
application, boot, and IPL.
When the optional dual FAX is installed and
U698 set to [ALL], the ROM version for port
1 is primarily displayed.
Figure 1-2-2
9. After completing the installation, run the
communications test to confirm that the fax
system is operative.
Code
Destination
Code
Destination
Code
Destination
000
Japan
159
South Africa
253
Sweden
009
Australia
169
Thailand
France
080
Hong Kong
181
U.S.A.
Austria
084
Indonesia
242
South America
Switzerland
088
Israel
243
Saudi Arabia
Belgium
108
Malaysia
253
CTR21 (European nations)
Denmark
126
New Zealand
Italy
Finland
136
Peru
Germany
Portugal
137
Philippines
Spain
Ireland
152
Middle East
U.K.
Norway
156
Singapore
Netherlands
254
Taiwan
MAINTENANCE MODE
MAINTENANCE MODE ACTIVE. U600
Initialize: All Data
Country Code
XXX
OEM Code
YYY
MAINTENANCE MODE
MAINTENANCE MODE ACTIVE. U600
Initialize: All Data
Country Code
XXX
OEM Code
YYY
APL
****************
BOOT
****************
IPL
****************
Y108810-2 Service Manual
Summary of Contents for FAX System M-New
