36
3. Press the key:
The display shows:
ENHANCED FEATUR.
4. Press the key
until the display shows:
SILENT RX: NEVER
You can choose the following options: “SILENT
RX:ALWAYS” or “SILENT RX: DAILY”.
5. To do so, press the key:
/
6. To confirm the selection, press the key:
7. To return the fax machine to the stand-by mode, press the
key:
Note
The daily silent reception setting (“SILENT RX: DAILY”) is
cancelled
by a power failure
.
D
ISPLAYING
CALLER
ID
This function, which may be activated by the telephone
company on request by the user,
is only available in some
countries
and
conforms
to the ETSI ETS 300 778-1
standard.
This function
tells you immediately who is calling.
In this
way, you will be able to decide in advance whether to answer
the call or not.
If the fax machine is in
stand-by mode
, whenever a call is
received,
one of the following items of information id
always shown when this function is enabled
:
•
Number or name of the caller
;
•
PRIVATE
: if the correspondent has chosen not to reveal
his identity to you;
•
NOT AVAILABLE
: if the correspondent is connected to a
telephone exchange that does not support this service.
If the fax machine isn’t in
stand-by mode
and, when an
incoming call is received, you want to
know who is calling
you
, you must press the
key before answering the
call.
It may however happen, if you are connected to a particular
kind of telephone network, that the number of the caller is
not displayed on the fax machine. If this occurs, contact
technical support for your country.
The fax machine is set up
to display the caller ID
. You
may however set it up not to display it, as follows:
1. Press the key
until the display shows:
INSTALLATION
2. Press the key:
The display shows:
TEL. LINE SET-UP
3. Press the key:
The display shows:
ENHANCED FEATUR.
4. Press the key
until the display shows:
CALLER ID: ON
5. To select the “CALLER ID: OFF” option, press the key:
/
6. To confirm the selection, press the key:
7. To return the fax machine to the stand-by mode, press the
key:
Note
If there is a power failure, the stored date and time are lost. if this
function is enabled, the first incoming call restores the date and time.
C
HANGING
NUMBER
OF
RINGS
This function is only enabled in some countries.
You can change the number of rings as follows:
1. Press the key
until the display shows:
INSTALLATION
2. Press the key
until the display shows:
RING COUNT:02
You can choose between the following values: “01”, “04”,
“06”, “07” and “08”.
3. To do so, press the key:
/
4. To confirm the selection, press the key:
5. To return the fax machine to the stand-by mode, press the
key:
Note
If you connect an
external telephone answering device
, make
sure that the number of rings after which the answering device is
activated is less than the one set on the fax machine.
