26
NOTE
If you cannot manage to remove the jammed document or sheet of
paper after performing the removal operations, it may be trapped
inside the fax machine. If this is the case, proceed as follows:
1. Lower the handset and place it on a stable surface (see fig. 1 of
procedure "
To clean the optical reader
").
2. Open and lift the operator console (see fig. 2 of procedure "
To
clean the optical reader
").
3. Move the print carriage to the left-hand edge of the fax machine
(see fig. 3 of procedure "
To clean the optical reader
").
4. Release the paper feed roller by pressing the lever (see fig. 4 of
procedure "
To clean the optical reader
").
5. Remove the roller from its compartment (see fig. 5 of procedure
"
To clean the optical reader
").
6. Remove the jammed document or sheet of paper.
7. Place one end of the roller on the pin situated on the left-hand side
of the fax machine (see fig. 7 of procedure "
To clean the optical
reader
").
8. Engage the roller by pressing the lever (see fig. 8 of procedure
"
To clean the optical reader
").
9. Close the operator console and put the handset back on its sup-
port.
Summary of Contents for Fax-Lab 105
