3.7
REPLACEMENT OF THE CD-ROM PLAYER
Removal of the CD-ROM player does not require disconnection of any cables as the player is connected
directly to the rear I/O board by a specific connector.
To remove the CD-ROM player, proceed as follows:
•
Operating from underneath the base module, loosen screw
A
.
•
Using an appropriate instrument (e.g. a slotted screwdriver), exert pressure on supporting bracket
B
in
order to free the CD-ROM
C
player from its guides.
WARNING!
When releasing the CD-ROM player from its housing, use one hand to extract it from the
module in order to prevent the player dropping during the operation.
A
B
Figure 3-12
I/O BOARD
DIRECT
CONNECTION
C
Figure 3-13
•
For re-assembly, reverse the above operations.
3-8
XZAC4074
Summary of Contents for Explor 200XS
Page 1: ...Web Cash Explor 200XS 300XS SERVICE MANUAL Code XZAC4074...
Page 6: ...VI XZAC4074...
Page 44: ...Figure 2 16 TEST KEYBOARD TEST BADGE READER Figure 2 17 XZAC4074 Service Manual 2 11...
Page 73: ...C B Figure 3 39 For re assembly reverse the above operations XZAC4074 Service Manual 3 25...
