Olivetti ECR8200, Service Manual

Page: 22 / 122

OPERATOR AND CUSTOMER DISPLAYS
The operator LCD display has a Menu system providing access to all cash register functions. You can raise
and tilt the display to obtain the most comfortable viewing position. The pop-up, single-line, customer display
can be raised and swivelled to obtain the most favorable position for customer viewing. When sales transaction
data is not displayed, scrolling messages can be programmed to appear according to the cash register
state (idle, off and so on).
SWITCHING THE OPERATOR DISPLAY
ON
To switch on the operator display press the key
on the keypad. The
Main menu
is displayed from which you can select:
•
Registration mode
- to enter sales transactions as a clerk (also in training mode)
•
Manager mode
- to enter all sales transactions as a Manager (also in training mode)
•
X1 & X2 Report mode
- to print X financial reports
•
Z1 & Z2 Report mode
- to print Z financial reports
•
Programming Mode
- to set up the cash register and program sales functions
•
Off mode
- to switch off the menus and the operator display.
See “Using the Menus” for how to navigate the menus.
NOTE:
The first time you switch on the cash register, it must be initialized(see “Quick Start
Programming”).
SWITCHING THE OPERATOR DISPLAY 0FF
To switch off the operator display, first terminate any sales transactions, then:
1.
Press to display the
Main menu.
2.
Use to scroll to the option
Off Mode.
3.
Press
The cash register is switched off. A scrolling message appears on the customer display, if programmed.
SYMBOLS AND MESSAGES
The Operator Display (OD) and Customer Display (CD) symbols and messages can be understood as
follows
Service Manual 22