Olivetti ECR 8220, Service Manual

Page: 27 / 122

10.
Set the menu RECEIPT MODE switch to JOURNAL, press the
[Feed]
key and manually
feed the paper into the slot until the paper catches and advances approximately six to
ten inches above the print mechanism.
Note
: I the paper does not feed properly, check the alignment of the paper in the slot
and/or for the straight edge on the end on the paper roll.
11. Il you are loading a journal record, slide edge of tape through slots on journal winder spindle
(depress the [Feed] key to advance additional tape, if necessary). Manually roll winder
toward the back of register to take up slack in tape. dose the printer compartment cover.
Service Manual 27