Olivetti ECR 8220, Service Manual

Page: 16 / 122

18.
-(*) Temporarily overrides a price that was assigned to a PLU number. During caption programming, when
pressed before a character, sets the character as double width.
19.
Pop-up list (4) allowing Paid Out (P0) or Received on Account (RA) transactions. As the
P0
key
register any money taken out of the cash drawer that is not part of a sale. AS the RA key registers a
any money received on account that is not part of a sale, for example, money put in the drawer at the start of
each business day can be registered as RA
20.
Pop-up Iist (3) allowing direct/percent discounts and add-on operations. As the
1
%
+/-
or
2%
key, when
appropriately programmed, applies a preset percentage reduction or add-on to the price of an item or to the
sales total. As the
1+/-
or 2
+I-
key, subtracts or adds an amount from/to an item or sales total.
21.
Opens the cash drawer without registering any amount or when changing cash for a non-sales
transaction. When programming entities such as clerks PLUs, depts and so on, press to display the
next item in numeric sequence (for example, clerk O1, clerkO2… and so on).
22.
When the operator display is off, this key switches it on. When the display is on, pressing this key
displays the Main menu. The
Main menu
contains the
0ff mode
option which you can use to switch the
operator display off. During a clerk transaction, allows you to switch to Manager mode to
perform operations disabled for the clerk. Pressing the key again afterwards, switches back to the clerk
transaction.
23.
-In Programming mode, these keys can be used to move through the menu options
and form fields in the direction indicated on the key.
When the menu item required is highlighted, press to select it. When navigating
forms, if me numbers are present on the Ieft, jump to the line you want by entering its number
followed by either arrow key.
24.
-In Programming mode, when selecting data for preset value fields, use these keys to scroll
through the values available, highlight the value wanted, and then select with
Service Manual 16