Olivetti ECR 3550 T euro, Clerk Manual

Page: 18 / 46

GB-14
REPRINTING A SALES RECEIPT
Your cash register allows you to reprint an exact copy of the sales receipt at the end of the current transaction
performed in the REG 1 mode or to print the transaction receipt in the REG 2 mode. The consecutive receipt
number is not increased on the reprinted receipt, and the reprinted receipt is not recorded in the journal record.
This function is particularly useful when working in the REG 2 mode, since it gives you the possibility of issuing
a sales receipt if one is required. Remember that the only difference between the REG 1 mode and the REG 2
mode is that in the REG 2 mode the sales receipt is not printed nor issued.
For this function, the cash register's RAM (Random Access Memory) can store a sales receipt of up to a
maximum of 60 lines. Therefore when a receipt reprint is requested, the cash register will only print up to 60
lines; if this threshold is exceeded, only the total amount will be printed.
Proceed as follows to reprint or print a sales receipt:
1. Perform a sales transaction with a tender in either the REG 1 or REG 2 mode. Refer to the transaction
examples provided further on in this chapter.
2. Press the [ST] key.
STANDARD TRANSACTIONS
Registering a Single Item Sale with Change Tender
Up to nine digits can be used for the amount of the entry.
Example: Register a £1.00 item in Department 1.
Compute change for a £5.00 tender.
Proceed as follows:
1. Type [100] and press the [department 1/21] key.
2. Type the amount tendered [500] and press the
[Amt Tend/Total] key. The transaction is ended
and the change due to the customer is displayed.
Registering a Multiple Item Sale with Exact
Cash Tender
Example: Register a £2.50 item to Department 1, a £.50
item to Department 5 and a £1.65 item to Department 8,
with an exact tender of £4.65.
Proceed as follows:
1. Type [250] and press the [department 1/21] key.
2. Type [50] and press the [department 5/25] key.
3. Type [165] and press the [department 8/28] key.
4. Press the [ST] key for the current balance due.
5. Press the [Amt Tend/Total] key to end the transaction.
Change on a
cash tender
Transaction total
Exact cash tender