22
Machine
Settings
Condition
9
0 = Non-selection of the TAX ON TAX Canadian taxation
system
1 = Selection of the TAX ON TAX Canadian taxation system
10
N/A
11
0 = Euro convert function not allowed
1 = Euro convert function allowed
12
0 = Zero price entry not allowed
1 = Zero price entry allowed
13
0 = Print conversion tender only
1 = Print all tender
14
0 = Local base currency
1 = Euro base currency
Chang
Chang
Chang
Chang
Changing the Cash Reg
ing the Cash Reg
ing the Cash Reg
ing the Cash Reg
ing the Cash Register's Standar
ister's Standar
ister's Standar
ister's Standar
ister's Standard Settings
d Settings
d Settings
d Settings
d Settings
Proceed as follows if you wish to change any of the standard machine
settings indicated in the previous table:
1. Slide the control switch to the PRG position.
2. Type the [number] of the machine condition (1-11 as indicated in
the table) that you wish to alter.
3. Type the [number] of the required setting.
4. Press the [RA/ ] key.
5. Program another feature or exit the program mode by sliding the
control switch to the OFF position.
Example: Program the cash register to work with a Euro base currency.
Type/Press:
[14] + [1] + [RA/ ]
PLU Pr
PLU Pr
PLU Pr
PLU Pr
PLU Programming Dump Repor
ogramming Dump Repor
ogramming Dump Repor
ogramming Dump Repor
ogramming Dump Reporttttt
If a large number of PLUs are created (bear in mind that up to 99
PLUs can be programmed), a separate receipt can be printed indicating
all the PLUs programmed. Their number, associated price, VAT rate
indicator (if applicable) and associated department are reported on this
receipt, which should be kept in a safe place for future reference.
