manualshive.com logo in svg

Olivetti d-Copia 45, Operation Manual

Share
Download
Olivetti d-Copia 45 Operation Manual Download Page 232

Section 9  TROUBLESHOOTING

9-14

4

Misfeed in the Duplex Unit
(“JAM 51” or “JAM 60” through “JAM 68”)

If one of the messages above is displayed, a misfeed has occurred in
the Duplex Unit. Perform the following procedure to remove the
jammed paper.

Inch specifications

Paper misfeed.

1.Remove paper from duplex unit.
2.Open upper cover and remove paper.
3.Loosen 2-green screws are on rear side of
   the duplex unit and open the guide plate.
4.Remove paper.
5.Close cover and reset duplex unit.

JAM 00

Metric specifications

Paper misfeed.

1.Remove paper from duplex unit.
2.Open upper cover and remove paper.
3.Remove 2 green screws on rear side of
   the duplex unit and open the guide plate.
4.Remove paper.
5.Close cover and reset duplex unit.

JAM 00

1

Open the front cover.

2

Turn the green conveyor knob A to the left at least 7 full turns
and remove the jammed paper.

3

Push the green release lever (B) down to the left.

4

Turn the green conveyor knob (C) to the left at least 4 full
turns.

 WARNING

High voltage is present in the charger section. Take
sufficient care when working in this area, as there is
a danger of electrical shock.

 CAUTION

The copier’s fixing unit is extremely hot. Take
sufficient care when working in this area, as there is
a danger of getting burned.

5

Pull the paper conveyor unit out towards you as far as it will
go.

6

Remove the jammed paper

A

B

C

Summary of Contents for d-Copia 45























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands