Olivetti d-Color MF920, Service Manual

Page: 51 / 332

Diagnostic information
2-7
Load < source >
< custom type >
Printer does not detect media meeting the description < custom type > in < source >,
where < source > is Tray 1 or Tray 2, Tray 3.
• Load the input source with the correct type and size media.
• Cancel the current job.
Load < source >
< size >
Printer does not detect media meeting the size requested in the source indicated.
• Load the input source with the correct type and size media.
• Cancel the current job.
Load < source >
< type > < size >
Printer does not detect media meeting the size or type requested in the source
indicated.
• Load the input source with the correct type and size media.
• Cancel the current job.
Load single sheet
<
custom type >
Printer does not detect media meeting the description < custom type > in the single
sheet feeder (manual feeder).
The following actions can be taken:
• Load paper, and the job continues.
• press
Select ( ), and choose an alternate source for media.
• Cancel the current job.
Load single sheet
<
custom string >
Printer does not detect media meeting the description < custom string > in the single
sheet feeder (manual feeder).
The following actions can be taken:
• Load paper and the job continues.
• press
Select ( ), and choose an alternate source for media.
• Cancel the current job.
Load single sheet
<
size >
Printer does not detect media meeting the description < size > in the single sheet
feeder (manual feeder).
The following actions can be taken:
• Load paper and the job continues.
• press
Select ( ), and choose an alternate source for media.
• Cancel the current job.
Load single sheet
<
type > < size >
Printer does not detect media meeting the description < type > and < size > in the single
sheet feeder (manual feeder).
The following actions can be taken:
• Load paper and the job continues.
• press
Select ( ), and choose an alternate source for media.
• Cancel the current job.
PJL ST Message Try one or more of the following:
• press Select ( ) to clear the message, and continue printing.
• Wait for the message to clear.
Power Saver The printer is saving power while it waits for the next print job.
• Send a job to print.
• Press
Select ( ) to warm the printer to normal operating temperature.
Afterwards,
Ready
appears.
Programming Code The printer is receiving a file that is a code update. Wait for the message to clear.
Warning—Potential Damage: Do not turn the printer off while this message appears
on the display.
Programming Flash Fonts and macros are being written to flash. Wait for the message to clear.
Ready The printer is ready to print.
User status and attendance messages (continued)
User primary message Explanation
Y112730-2