Olivetti d-Color MF220 Copy Operations Download Page 139

Page: 139 / 315

d-Color MF360/280/220 (Version 3)

6-9

6.3

[Copier Settings]

6.3

[Copier Settings]

Configure the settings used by the copy functions.

Press the

Utility/Counter

key

[User Settings]

[Copier Settings].

Settings

[Auto Booklet ON when
Fold & Staple]

Configure whether to automatically specify Booklet when Center Staple
and Fold is selected.
This item is displayed if the

Saddle Stitcher SD-509

is installed in the

Fin-

isher FS-527

[Auto Zoom for Com-
bine/Booklet]

Configure whether the preset zoom ratios are automatically selected when
Combine or Booklet is selected in Auto Paper mode.
•

Select the recommended zoom ratios for the following zoom settings:
2 in 1, Booklet: 64.7% (70.7%)
4 in 1: 50.0%
8 in 1: 32.3% (35.3%)

[Auto Sort/Group Selec-
tion]

Configure whether to output the copied pages automatically in Sort mode
when copying multiple-page original using the

ADF

[Default Copy Settings]

Configure the initial values for the Copy function to be displayed when the
power in turned on or the

Reset

key is pressed.

[Current Setting]

The current settings are used as the default set-
tings.

[Factory Default]

The factory settings are used as the default set-
tings.

[Default Enlarge Display
Settings]

This setting is for the enlarged display screen operations. For details, refer
to the [User's Guide Enlarge Display Operations].

[When AMS Direction is In-
correct]

Configure whether to print or discard the job when the original orientation
does not match that of paper in Auto Zoom mode.

[Separate Scan Output
Method]

Configure the output for divided original loaded in the

ADF

or for multiple

pages of the original scanned on the

Original Glass

[Page Print]

Printing of copies that can be printed begins while
the original is being scanned.

[Batch Print]

Printing begins after all pages of the original have
been scanned.

[Enlargement Rotation]

Configure whether to rotate and print a large-size original image when the
original orientation does not match that of paper.

[Auto Zoom (Platen)]

Appears when user access is permitted under [Administrator Settings]. For
details, refer to page 7-40.

[Auto Zoom (ADF)]

[Specify Default Tray when
APS Off]

[Select Tray for Insert
Sheet]

Summary of Contents for d-Color MF220




























































































































































































































































































































Search results

Summary of Contents for d-Color MF220

Reviews:

Related manuals for d-Color MF220

Brands by name

Popular brands

Olivetti d-Color MF220, Copy Operations

Search results

Summary of Contents for d-Color MF220

Reviews:

Related manuals for d-Color MF220

Brands by name

Popular brands