Olivetti AK-730 Service Manual Download Page 35

Page: 35 / 155

3NB/3ND/3N0/3NK

1-3-1

1-3 Maintenance Mode

1-3-1 Maintenance mode

The machine is equipped with a maintenance function which can be used to maintain and service the
machine.

(1) Executing a maintenance item

Enter “10871087” using

the numeric keys.

Enter the maintenance item

number using the cursor up/down keys

or numeric keys.

The selected maintenance item is run.

Press the stop key.

Press the start key.

Start

End

Maintenance mode is entered.

The maintenance item is selected.

Maintenance mode is exited.

Repeat the same

maintenance item?

Run another maintenance

item?

Yes

Enter 001 using the cursor

up/down keys or numeric keys

and press the start key.

Y113480-7

Sevice Manual

Summary of Contents for AK-730



























































































































































Search results

Summary of Contents for AK-730

Reviews:

Related manuals for AK-730

Brands by name

Popular brands

Olivetti AK-730, Service Manual

Search results

Summary of Contents for AK-730

Reviews:

Related manuals for AK-730

Brands by name

Popular brands