Oliver Platinum Series, Operation Manual, Page: 36 / 61

35
I. Machine Settings
Figure 29: Controlling Auto Mode from Machine Settings
The Machine Settings screen allows for all the parameters of the gravity to be changed in one place.
If desired, the settings can be saved in a recipe to be called up later. The following sections will
describe all of the parts of the settings used in the Automatic mode. Note: Not all of the fans or gates
shown here will be the same for every model of machine. Some have more fans than other. A retrofit
machine will not have any fans shown here, and will have dampers instead. Most machines do not
have automated Gates yet except for a feeder. The Vibratory Feeder will be replaced with whatever
type of feeder your machine is said to have in the Machine Options screen.
I. Fan or Damper Control
Each of the fans or dampers can be controlled via the numeric entry box next to the number
designation for that fan. The entry can be from 0 – 100. For example, to set fan 1 to 75% of its
maximum speed, touch the box next to the label for fan 1. A keypad will appear, allowing you to
change the value to anything between 0 and 100. See Figure 30. It is the same for the dampers on a
retrofit.
Figure 30: Changing fan 1 speed with keypad