Oliver MODEL 777-NT, User'S Operating And Instruction Manual, Page: 11 / 44

777-NT Variety Slicer
0777S20038 5-1
TROUBLESHOOTING
WARNING
ALWAYS DISCONNECT THE SLICER FROM THE POWER SUPPLY BEFORE
ATTEMPTING ANY TYPE OF MAINTENANCE TASK, INCLUDING
TROUBLESHOOTING.
The Slicer Will Not Start (Motor Is Not Humming)
•
The machine is not plugged in.
•
There is no power at the outlet. (Check by plugging in a small working appliance,
like a lamp. Check to see if a circuit breaker has tripped. If the circuit breaker has
not tripped and the circuit is still not working have a qualified electrician check the
circuit.)
•
The motor switch overload has tripped. (To reset push firmly in the direction shown
on the switch nameplate.)
•
There are bread crumbs in the motor starting switch. (Have a qualified electrician
disassemble the switch and clean it.)
•
The switch arm on the Switch Trip Mechanism is bent. (A qualified service agent can
bend the arm to correct the problem, see the illustration below.)
•
The switch trip mechanism is binding. (Clean the mechanism and lubricate its
pivot point, see above illustration.)
•