Figure 3 Valve in Open
Position
Figure 4 Pressure Release
Valve and Drain Plug
Locations
6) Drain the freshwater tank by opening the shut-off valve located in the rear
curbside service access closest to the galley. (See figure 3 for correct valve
positioning) Next, turn on the kitchen, bathroom, & outside wash station faucets to
help decrease drain time & empty the hot & cold water lines.
7)
Once water stops flowing from the faucets, turn off the water pump at the
switch under the pantry, turn off faucets, & close the freshwater tank drain
valve.
8)
Once the water within the water heater has cooled, locate the pressure release
valve on the water heater panel located outside the travel trailer on the curb-side
of the unit near the rear of the unit. Open the pressure release valve by lifting
up on the lever. Finally, remove the drain plug located at the bottom of the
panel with a 1 1/8” socket to drain the tank.
78
Summary of Contents for Legacy Elite II2017
