Oliver Legacy Elite 2017, Owner'S Manual

Page: 88 / 122

After the water heater has been completely drained, replace the steel plug
and close the pressure release valve.
t is recommen e that you use air to blow the remaining water from the
lines nsert air gun into the fresh fill an city connection inlet ports an blow out
the lines When blowing air through the lines, the faucets should be open and
you should use the toilet foot pedal to allow air to blow all water in the toilet out.
ax 40 P
Adjust the water pump valves in the curbside access compartment closest to
the galley to the winterization configuration. See configuration on next page)
onnect the han pump to the city water inlet locate on the ri er s si e rear of
the unit . P ut the loose end of the tube into a container of antifreeze
. I
n or
d
er to
ensure that antifreeze fills the city water line turn on the faucet in the outsi
d
e
wash station and then pump antifreeze into the line until the antifreeze flows
from the faucet
. L
astly, shutoff the faucet before procee
d
ing to the ne
x
t step.
onnect a hose that measures or less to the inlet locate at the lower rear of the
unitan to the right of the bumper n some mo els the inlet is locate in the far
right si e of the compartment behin the bumper e t stic the loose en of the
hose into a container of antifreeze
urn on the water pump an then turn on the hot water at the faucet in the
bathroom and leave it running until antifreeze flows from it. Repeat the process
for the cold water lines. Note: if after a few minutes antifreeze d oesn ' t flow
from the faucets or toilet turn off the water pump to a v oi d d amaging it .
e t flush the toilet releasing the pe al once antifreeze begins to flow into
the toilet bowl ea e some antifreeze in the bowl to eep the seal lubricate
epeat the proce ures one in step for the itchen faucet an then for the
faucet in the outsi e wash station in the rear ri er s si e compartment .
Pour cup of antifreeze into the itchen sin rain the b athroom sin
rain an the shower drain.
Figures 6 Inlet Located to
the right of the bumper
79