Oliver 2018, Owner'S Manual

Page: 14 / 30

13
Controls
1. Start / Stop Paddle Switch : Insert
the yellow safety lockout key and lift
up on the paddle to start the lathe.
Push down on the paddle to stop the
lathe. If leaving the lathe
unattended, remove the yellow
safety lockout key to prevent
unauthorized usage. Store the
lockout key in a safe location for
authorized persons only.
2. RPM Indicator : Displays the current
spindle speed.
3. Speed Control : Spindle RPM’s are
controlled with this control. To
change the speed, rotate the control
until the desired speed is displayed
on the indicator.
Important: Only change the speed
when the motor is running or
damage may occur.
4.
Reversing Switch
: The reversing
switch can be used to change the
spindle rotation.
Important: Allow the motor to
come to a complete stop before
reversing direction or damage
may occur.
.