GSM Functions Set Up
OLIVER
IGD
Follow this set up sequence to configure the GSM modem for operation.
Ensure the GSM module is connected as indicated in the previous drawing but do not mount
until the signal strength status has been checked.
Select System Settings and ensure the Modem Option is set to ENABLED
From the GSM Tab Select GSM Test
This diagnostic page provides
test functions to check correct
operation of the GSM module.
The options for ALARM SMS,
SCHECK SMS, GAS VALUES
EMAIL, EVENTS EMAIL, can
be selected to send each report
as selected. This requires that
valid email or phone data is
already set up.
Returns information as:
Model Model xxxx
Software Version xx.xx
SIM Card Number xxxxxxxxxxx
Phone Operator (like Vodafone)
Registered (yes/no)
Field Strength (0-100%)
Note that a valid SIM card that is
registered on contract is required.
Re-initialises the
modem and will
return a PASS or
FAIL message
Performs an
internal connection
test 920 to modem
and returns
PASS/FAIL
Resets the
modem and
returns
PASS/FAIL
38
