background image

18.2.2004

 Rev. 1.0

Operating instructions

11

4.2.3

Cooking

Set the cooking temperature by means of the thermostat;

When the set temperature is reached, add salt to the water and (if necessary) oil;

Arrange food in baskets and immerse in hot water. (Cooking time depends on
food);

When products are cooked, lift the basket up to drain, shake lightly and then empty
the product into a container or onto a serving plate;

Do not use the appliance if the tank is empty.

Never leave the appliance unattended while in use.

4.2.4

Switching off the appliance

To switch off the pasta cooker turn the thermostat to position 0 (shown in figure 2). At
this point the line indicator light will switch off.

4.2.5

Safety thermostat

The appliance is equipped with a safety thermostat. The safety thermostat trips if the tem-
perature of the heating elements increases excessively (fire protection function). This is a
safety feature in the event of malfunctions, faulty components, or improper use (no water
in the tank, dirty heating elements, etc.).

If the safety thermostat trips, disconnect power to the appliance and proceed as follows:

1.

Wait for about 10 minutes for the water temperature to fall below 90°C.

2.

Reset the safety thermostat as follows:

Open the doors.

Unscrew the nut under the control panel (shown by the arrows in figure 4);

Fig. 4

Insert a slender tool (max. diameter 7 mm) into the hole;

Press the tool until you hear a metallic click.

Refit  the  nut.

3.

Clean the tank and fill with water up to the maximum level.

4.

Turn the appliance on.

If the safety thermostat trips again, call service.

Summary of Contents for metos 700 72/02CPE









































Reviews: