18
The laminator is provided with a „Release“ function in order to clear foil jams
quickly.
1
If the foil jams, switch the equipment off and press the switch on the
top, right side of the unit.
2
Hold the laminator firmly and pull the foil together with the document
to be laminated out of the laminator's’insertion slot.
3
It will probably be necessary to then clean the unit several times as
described in the Section "C“eaning and Servicing".”If foil jams occur
repeatedly or jammed foil cannot be removed from the laminator,
please contact our hotline.
Cleaning and Servicing
Deposits and residual adhesive on the transport rollers can influence the re-
sults of the laminating process. Therefore, the transport rollers must be
cleaned periodically after use:
To do this, insert a folded piece of paper in the insertion slot. Residual adhe-
sive is removed and taken up by the paper when ejected. Repeat the proc-
ess several times.
Disconnect the power plug before starting to clean the unit with a damp
cloth. If necessary, the housing can be cleaned using a cloth moistened with
clean water with a little mild soap applied. Never use any solvents or ag-
gressive cleaning agents.
