Olimpia splendid Unico Air R410A, Instructions For Use And Maintanence

Page: 79 / 489

UNICO AIR ON/OFF
EN - 31
ENGLISH
• As the room temperature nears the setting, fan speed is reduced automatically.
• In dehumidification mode, it is not possible to control the speed as the appliance
can only operate exclusively at low speed.
3.5.11 - SILENT key
• To activate this mode, press the B3 key on the remote control, the D6 symbol
appears on the display.
• Activating the night function (SILENT) allows you to obtain multiple results:
- gradual increase in the set temperature during cooling mode
- gradual decrease in the set temperature for heating (HP versions only)
- reduction of the sound level of the appliance
- savings on nightly electricity consumption
• To activate the night function , it is necessary to select the operating mode and
the desired temperature first, then press key B3 to activate it.
• Ideally, the activation of the night key should be done immediately before falling
asleep.
• In cooling mode, the set temperature is maintained for an hour after activating the
night key .
In the following two hours the setting is gradually increased, while the fan operation
is set to low speed.
• After the second hour, the temperature setting and the fan setting are not further
altered.
• In heating, the set temperature is maintained for an hour after activating the night
key .
Over the next two hours, the setting is gradually lowered, while the fan operation
is set to low speed.
• After the second hour, the temperature setting and the fan setting are not further
altered.
• The night key is not available for operation in dehumidification and ventilation only.
• The night key can be disabled at any time (ideally upon awakening) by pressing
button B3 once more.
• At this point, the fan temperature and speed settings that were set before activating
this function are restored.