46
10.1.4.3 Enabling contact
The B1018 board manages an enabling contact that, when it is open,
forces the unit into standby and shows an open contact alarm in the app.
When the contact is closed, the B1018 board forces the unit to start up in
the prior mode.
10.2 Olimpia Splendid
MAESTRO
app
10.2.1 Downloading and installing the app
Before configuring the app:
–
Activate the GPS.
–
Activate air mode
–
Turn on Bluetooth.
–
Get within 2 meters
(6 feet)
of the air conditioner unit.
In order to configure the app, perform the following steps:
–
Start up the app and accept the personal data notice.
–
Allow the app access to the position.
–
from the list that appears, select the climate control unit to proceed
with configuration.
–
enter the PIN and select NEXT. The PIN is on the back of the Wi-Fi
kit or in the included items documentation.
–
Wi-Fi connection (automatic procedure).
–
Configuration complete.
10.2.3
Control diagrams
BUTTON
DESCRIPTION
1
Settings: Access the app settings
2
Alarm history: Access the list of alarms.
3
Room
Climate control unit selector indicates the unit
connected to the app, allows selection of
another installed unit.
4
Indicate communication channel: Display the
communications channel use by the app.
5
Power: On/Off unit control.
6
Temperature control: desired ambient
temperature setting.
7
27°C
Indication of temperature setpoint.
8
Timer: Timer on/off settings and access to
related settings
9
Temperature control sidebar. Set desired ambient
temperature.
10
Current ambient temperature indicator: Display the ambient
temperature detected by the unit.
11
Air
louver
control: Select stationary or
oscillating mode for the air deflector.
12
Mode: Select the desired operating mode.
13
Select air speed: Select the fan operation
speed.