Olimpia splendid INVERTER 12 HP, Service Manual

Page: 5 / 15

4.6 ECO key:
Energy saving function is activated through this button (T2) and the switching on of the
ECO
icon remote control on
the display, which automatically optimizes machine running. These savings are guaranteed by imposing a current
limit (3.8 A) lower than expected for the IPM module (including accessories), so varying in proportion to the
frequency of the compressor.
4.7 Night well-being mode:
This mode can be selected from the remote control by acting on the relative key and can only be used in
conjunction with cooling and heating mode.
In cooling mode, when the night mode is enabled, both the internal and external fans are forced to run at minimum
speed and the T°set is automatically increased by 1°C after 1 hour and by a further 1°C after 2 hours.
In heating mode when the night mode is enabled, the internal fan is forced to minimum speed, external fan is
forced to medium speed and the T°set is automatically decreased by 1°C after 1 hour and by a further 1°C after 2
hours.
The night well-being mode button may be disabled at any time (ideally when you wake up in the morning) by
pressing button T3 again; at this stage the temperature and fan speed settings made prior to starting Night well-
being comes back into effect.
4.8 AUTORESTART:
In case of black-out from standby mode, when the AC power comes back, the compressor activation is immediately
allowed. In case of black-out during fan/heating/cooling/dehumidify mode, when the AC power comes back, the
compressor activation delayed is 3 minutes.