Olimpia splendid FUTURA, Instructions For Use And Maintenance Manual

Page: 36 / 96

EN - 12
ENGLISH
3.3.c - Location of the remote control
Keep the remote control (10) in a position from which the signal can reach the receiver of the appliance
(maximum distance is approx. 4 metres - with charged batteries) (figure E).
The presence of obstacles (furniture, curtains, walls, etc.) between the remote control and the appliance
reduces the remote control range.
3.4 - USE OF THE APPLIANCE
Work as follows in order to use the appliance.
3.4.a - Preliminary operations
• Place the appliance on a stable and not inclined base, at least 15 cm. from the
wall or from any other object, in order to ensure the correct air circulation.
• Do not obstruct the air outlet/inlet ways.
• Insert the plug into the socket, press the ON/OFF switch (8); the appliance
emits a “beep” and goes into stand-by.
Before electrically connecting the appliance, make sure the plate data correspond
to those of the electricity distribution network.
3.5 - OPERATING INSTRUCTIONS
Each time the keys are pressed, the appliance emits a “beep”.
a. Insert the plug into the socket.
b. To turn on the appliance, press the switch (8) (a beep is heard) (Fig.F).
b. To activate the appliance, press the ON/OFF key (D1) on the display, or the ON/OFF key (A1) on the
remote control.
c. To turn off the appliance, see the next paragraph.
3.5.a - ON/OFF key
Remote control
In stand-by mode (display off) by pressing any key on the remote control, the display turns on and shows
the room temperature (in °C).
By pressing the
ON/OFF
(A1) key, the appliance turns on and the display shows the room temperature (in
°C) and the speed previously set.
To turn off the appliance, press the
ON/OFF
key (A1) again.
Display
By pressing the
ON/OFF
(D1) key, the appliance turns on and the display shows the room temperature (in
°C) and the speed previously set.
To turn off the appliance, hold down the
ON/OFF
(D1) key for a few seconds until the appliance emits the
second beep.