Olimpia splendid CALDO TRENDY ST, Instructions For Installation, Use And Maintenance Manual

Page: 36 / 188

EN - 14
ENGLISH
9 - FUNCTIONING
9.1 - Switching on
Make sure the switch is set to “I” (ON) (6); press the ON/OFF key (SW1) or (T1): the
appliance emits a “Beep” and switches on.
Press the ON/OFF key (SW1) or (T1) again to switch off the appliance.
After the appliance has been switched off, the fan will continue to
work for approximately 1 minute to cool down the components, it
will stop automatically.
Set the switch to “0” (ON) (6) to switch off the appliance.
9.2 - “HIGH” mode
Press the Mode key (SW2) or (T2) until the Led (S1) switches on.
Press the keys (SW3 - SW4) or (T3 - T4) to increase or decrease the desired temper-
ature.
Temperature is read by a thermostat located in the appliance, in-
stall a thermometer in another part of the room for a more accu-
rate reading.
9.3 - “LOW” mode
Press the Mode key (SW2) or (T2) until the Led (S2) switches on.
Press the keys (SW3 - SW4) or (T3 - T4) to increase or decrease the desired temper-
ature.
Temperature is read by a thermostat located in the appliance, in-
stall a thermometer in another part of the room for a more accu-
rate reading.