Olimpia splendid B0858, Use And Installation Manual

Page: 54 / 60

ENGLISH
EN- 24
9.3 - Cloud configuration
• From a PC equipped with internet connection, digit the following address in
the browser
https://sioscontrol.olimpiasplendid.it
Access the portal using the admin credentials.
1) From ADMINISTRATION , access the page COMMUNITIES , press NEW .
Compile all the required fields (“code” user name and surname, “ name ”
user name and surname, “ description ” user name and surname, “ parent
community ” is the parent community CAT or SERVICE ).
2) From ADMINISTRATION , access the page PLANTS , press NEW . Compile
all the required fields (“ code ” plant name (fixed and visible by everyone,
including the user), “ description ” plant name, “ time zone ”, “ community ”,
“ plant picture ”, “ automatic geolocation ” disabled, “ address ”, “ latitude ”,
“ longitude ”).
3) From ADMINISTRATION , access the page LINES , press NEW. Compile all
the required fields (“ line code ” do not compile, press REGISTER LINE , “ line
type ” c.Pco, “ MAC ” from menu INFO of B0858, “ UID ” from menu INFO of
B0858, “ Tera ” from menu INFO of B0858).
After creating the LINE, the cloud is ready to load the new SiOS CONTROL
plant. Loading of the new plant occurs automatically. It is advised to remove
mains voltage from the main control unit B0858 and then to reactivate it.
Loading of the new plant may take a few minutes.
Loading of the new plant can be considered complete when the item NUM
DEVICE becomes 1 in the LINES menu
4) From ADMINISTRATION , access the page LINES , press TOKENS , enable
the TOKEN for the new plant.
Remote management of the plant is enabled.