EN - 9
ENGLISH
PROBLEM
POSSIBLE SOLUTION
The appliance does not work.
Power plug: Disconnect it from the power outlet and plug it in again.
Power Failure: When the power is returned, try again.
Air blows but water vapor is not
produced.
There may be oil residues in the reservoir; wash the reservoir and try again.
The surface of the ultrasonic disk is dirty: Clean ultrasonic disk (Fig. H).
If you use hard water, replace with softer water.
Humidity level is low.
The surface of the ultrasonic disk is dirty: Clean ultrasonic disk (Fig. H).
The water in the unit is too cold: Replace with cool, but not cold water.
The humidity has a bad smell.
Poor maintenance or dirty water: Accurately clean the reservoir and fill it up with
clean water.
White powder is formed near the
appliance.
Hard water may deposit a certain of dust. Dust in the air also settles because of
added humidity in the room. Use distilled water if this becomes a nuisance.
The appliance has stopped
working.
Little or no water. Unplug the appliance and fill up the reservoir.
Water accumulates outside the
appliance or around it.
Humidity saturation. Lower the mist control setting (H LED off).
Point the nozzle away from objects. Lift the appliance onto a water-resistant lev-
elled surface at least 60 cm above the floor.
The appliance will not start.
Too much water in the reservoir. Do not exceed the MAX marking.
The appliance does not play
music.
• WIRELESS BT function not enabled on your smart device.
• Smart device disconnected.
• Smart device and appliance are too far from each other.
9 - TROUBLESHOOTING GUIDE
Summary of Contents for Astomi Sound
Page 48: ...260545A ...
