Olimpia splendid 02058, Instructions For Use And Maintenance Manual, Page: 71 / 172

DOLCECLIMA EASY 10P
ENGLISH
EN - 29
3.12 OTHER FUNCTIONS
3.12.a Auto-Restart
a . if the appliance switches off due to interruption of power supply, it automatically restarts with the previous
settings when electrical power is restored.
3.12.b SLEEP function
• This function can be activated only from the remote control.
• This function is not available while the Dehumidification (DRY) and Fan Only (FAN) modes are
active.
a
. When the appliance is running, press the key “
SLEEP
” on the remote control.
the icon appears on the control panel and on the remote control display..
the appliance will decrease (when cooling) or increase (when heating) the set temperature by 1°C (1 or
2 f) for 30 minutes.
b
. then, the appliance will decrease (when cooling) or increase (when heating) the set temperature by 1°C
(1 or 2 f) for an additional 30 minutes.
c
. this temperature will be maintained for 7 hours before returning to the originally selected temperature.
once this time has passed, the appliance will restart working as originally programmed.
d
. Press the key “
SLEEP
” on the remote control to stop the function; the icon on the control panel and on
the remote control display turn off.
3.12.c FOLLOW ME function
• This function can be activated only from the remote control.
• This function is not available while the Dehumidification (DRY) and Fan Only (FAN) modes are
active.
in this function, the remote control serves as a thermostat.
a . When the appliance is running, press the key “ FOLLOW ME ” on the remote control.
b . move with the remote control in an area of the room different from where the appliance is positioned
(maximum distance is 7÷8 metres) directing it towards the appliance itself and making sure there are no
obstacles between them.
c . Set the desired temperature on the remote control; the appliance works until it takes the temperature of
the area where the remote control is positioned to the value set on the remote control itself.
d . the remote control sends a signal to the appliance and, if it doesn’t receive a response within a maximum
time of 7 minutes, the function deactivates.
e . Press the key “ FOLLOW ME ” on the remote control or switch the appliance off to stop the function.
3.12.d Setting the unit of measurement of temperature
it is possible to choose the set and environment temperature unit of measurement choosing between ° C
(Celsius) or F (fahrenheit).
Work as follows:
- On the control panel , press the keys + and - at the same time for approximately three seconds.
the desired unit of measurement appears on the display of the control panel.
- On the remote control , keep the central key TEMP pressed for approximately three seconds.
the desired unit of measurement appears on the display of the remote control.
The unit of measurement change must be performed both on the control panel and on the remote
control.