Olimpia splendid 02058, Instructions For Use And Maintenance Manual, Page: 69 / 172

DOLCECLIMA EASY 10P
ENGLISH
EN - 27
c
. in this mode it is not possible to select either the fan speed and the temperature.
d
. to switch off the function, press key “
MODE
” on the control panel or switch off the appliance.
3.8 DEHUMIDIFICATION MODE (DRY)
a
. When this mode is selected, the appliance dehumidifies the environment.
this mode can be selected by pressing the key “
MODE
” once or more (on the remote control or on the
control panel) until when the specific icon appears:
- on the control panel - on the remote control display.
b
. in
DRY
mode, it is not possible to select the fan speed or to adjust temperature.
the fan motor works at low speed.
c
. Keep doors and windows closed to achieve the best dehumidifying effect.
Do not
place the air outlet pipe out of a window.
d
. Connect the condensation discharge pipe (paragraph 2.6.a)
3.9 VENTILATION MODE (FAN)
a
. When this mode is selected, the appliance doesn’t perform any action both on temperature or on air
humidity in the environment, but only maintains it in circulation.
b
. this mode can be selected by pressing the key “
MODE
” once or more (on the remote control or on the
control panel) until when the specific icon is shown on the display of the control panel and/or of the remote
control.
- icon on the control panel - icon on the remote control display
c . in this mode, the fan is always switched on and it is possible to select its desired speed by pressing the
key “
FAN
” on the remote control or the key on the control panel.
d
. the fan speed is displayed as indicated in paragraphs “3.1” (point SW7) and “3.2” (point d7).
3.10 HEATING MODE (HEAT)
(only for version with heat pump)
a
. When this mode is selected, the appliance heats the environment.
b
. this mode can be selected by pressing the key “
MODE
” once or more (on the remote control or on the
control panel) until when the specific icon
is shown on the display.
c
. in this mode, the fan is always switched on and it is possible to select its desired speed by pressing the
key “ FAN ” on the remote control or the key on the control panel.
the fan speed is displayed as indicated in paragraphs “3.1” (point SW7) and “3.2” (point d7).
d . the temperature set-point is included between 17°C and 30°C (from 62 f and 86 f) with 1°C variations
and it can be set using the keys +/- on the control panel or with the keys ▲ ▼ on the remote control.
e . after a certain time (maximum three minutes) after the activation of the operation mode, the heat pump
activates and the appliance starts delivering warm air.
f
. Connect the condensation discharge pipe (paragraph 2.6.a)