ORDER CODE:
OLIMEXINO-STM32
–
assembled and tested board
How to order?
You can order directly from our web-shop or from any of our distributors.
Check our web
https://www.olimex.com
for more info.
Board revision history:
Revision
Notable Changes
A
- C6 (100n/0603) is changed to 4.7uF/0603.
B
- Removed the label "<c> 2011".
- Logos added: Open Hardware, Designed by OLIMEX and Made in Bulgaria,
2011 logos
- Added divider which includes R34, R35 and C32 with aim to measure the
battery.
- All tracks which were placed close to board's edges were moved as far
as possible away from them.
- Some changes in the values of some components were made
C
- Added closed by default SMD jumpers on LED2 and R10(UEXT_CS)lines
- The table with the jumper description is now updated
- Some logos and print lines have been re-arranged
D
- Added again the PWR JACK connector for the external supply in the board
design and schematic
E
- R18 is changed from 3k/1% to 3.01k/1%
- C15(tantalum 47uF/6.3V) is removed and replaced by 2 (two)
22uF/6.3V0603 capacitors
F
- Wires near the edges of the board were moved to the center
- By default the board now provides 5V on the Arduino connector (at the
5V pin). Added 3-pin SMD jumper at the bottom to change to 3.3VA.
- Different SWD connector used now
- Placing new and better USB OTG connector
- Placing new and better micro SD card connector
Page 16 of 19
