OLIMEX© 2017
OLIMEXINO-32U4 user's manual
CHAPTER 10 REVISION HISTORY
10. Introduction to the chapter
In this chapter you will find the current and the previous version of the document you are reading.
Also the web-page for your device is listed. Be sure to check it after a purchase for the latest
available updates and examples.
10.1 Document revision
Revision
Changes
Modified
Pages
Initial
Initial release
All
B
Manual adjusted for Arduino IDE version 1.0.1
Fixed links
8, 9, 15
C
Adjusted formatting, fixed some mistakes, updated
links
All
D
Added info about the I2C
Updated disclaimer and warranty pages
ICSP and UEXT connector changes due to new
schematics
Adjusted formatting, fixed some mistakes
2, 15, 16,
17, 20, 22,
26, All
E
Fixed - “the LEDs and the BUTTONs are on the edge
of the board so there is easy access even if the boards
have shields on them” - not true for RST button
Fixed - “All signals on the connectors are printed on
top and on bottom of the board, so when you check
with probe you know exactly which port you are
measuring” - not true with OLIMEXINO-32u4 (only
on component side)
Fixed - “Proto area is shown.” - there is no proto are
Fixed -”programming/debugging outside of the
PINGUINO IDE” - should be ARDUINO IDE
Fixed “Also note that the board comes with no
5, 14, 15,
17, 25
Page 25 of 28