OLIMEX MSP430-CCRF, User Manual

Page: 3 / 16

BOARD USE REQUIREMENTS:
Cables:
The cable you will need depends on the programmer/debugger
you use. If you use MSP-JTAG-TINY, MSP-JTAG-TINY-V2, or MSP-JTAG-ISO, you
will need USB A-B cable. If you use MSP-JTAG, you will need LPT cable.
Hardware:
Programmer/Debugger
MSP-JTAG-TINY
, MSP-JTAG-TINY-
V2,
MSP-JTAG-ISO
,
MSP-JTAG
,
MSP-JTAG-RF
, or other compatible
programming/debugging tool.
You can also use other Olimex's board MSP-CCRF, or MSP-CCRF-LCD for radio
communication.
PROCESSOR FEATURES:
MSP430-CCRF board use microcontroller CC430F5137IRGZFBD100 with these
features:
−
True System-on-Chip (SoC) for Low-Power Wireless Communication
Applications
−
Wide Supply Voltage Range: 1.8 V to 3.6 V
− Ultra-Low Power Consumption:
−
CPU Active Mode (AM): 160 μA/MHz
−
Standby Mode (LPM3 RTC Mode):2.0 μA
− Off Mode (LPM4 RAM Retention): 1.0 μA
−
Radio in RX: 15 mA, 250 kbps, 915 MHz
− MSP430™ System and Peripherals
−
16-Bit RISC Architecture, Extended Memory, up to 20-MHz System Clock
−
Wake-Up From Standby Mode in Less Than 6 μs
− Flexible Power Management System with SVS and Brownout
−
Unified Clock System with FLL
− 16-Bit Timer TA0, Timer_A with Five Capture/Compare Registers
−
16-Bit Timer TA1, Timer_A with Three Capture/Compare Registers
−
Hardware Real-Time Clock
−
Two Universal Serial Communication Interfaces
−
USCI_A0 supporting UART, IrDA, SPI
− USCI_B0 supporting I
2
C, SPI
−
12-Bit A/D Converter With Internal Reference, Sample-and-Hold, and
Autoscan Features
−
Comparator
−
128-bit AES Security Encryption/Decryption Coprocessor
− 32-Bit Hardware Multiplier
−
Three-Channel Internal DMA
Page 3