4.1. DIRECT PROGRAMMING USING MPLAB, C32, PIC-KIT3
By programming in C you will have access to all processor resources.
What you will need is:
–
Obtain MPLAB-X and the C32 compiler from Microchip (
http://www.microchip.com
) and
download the latest
DuinoMite
firmware from Olimex (
http://www.olimex.com
)
–
we assume you already have a PIC32 programmer/debugger, if you do not have you may need
to obtain the
PIC-KIT3
and
PIC-ICSP
, note that you will need the PIC-ICSP even if you have
the Microchip programmer as
DuinoMite
uses a small 0.05” ICSP connector instead of the
more common 0.10" ICSP connector.
With this setup you have access to a complete development environment which works on Windows,
Linux, MAC OS and you can use all of the hardware features of
DuinoMite
boards.
Summary of Contents for DuinoMite
Page 27: ...4 SOFTWARE...
